在线天天看片视频免费观看

        1. <th id="ymxde"><address id="ymxde"></address></th>

            <thead id="ymxde"><option id="ymxde"></option></thead>

                1. 氣動虎鉗

                  產品展示

                  氣動虎鉗

                  MC增壓器型超高壓快速虎鉗

                  MC PRECISION SUPER HI-PERSSURE RAPID VICE

                  點擊產品圖片放大

                  資料下載

                  在線詢盤

                  產品詳細介紹

                  (全國第一臺增壓馬達虎鉗) 非一般氣壓缸型結構
                  The first reinforced motor vice (Non-common pneumatic cyl. structure) in Taiwan.


                  本產品已獲美國發明專利.臺灣.大陸等多國多項專利
                  本虎鉗原理是採用自行研發之往復式空氣馬達(專利結構),以氣壓連續推動油路方式,來達成自動化,且不需三點組合來過濾水氣,其特性絕對為全國所僅有甚而超越國外任何廠牌。
                  This Product Is The Exclusive Patent Authorized By U,S,A,Taiwan And P.R.C
                  The principle of this vice is adopting the reciprocating pneu.motor (PAT.stucture) which P&D by inhouse and that employs an air actuated cylinder.Circuiting progressively to make automation,no need the R.F.L unit to filter the moisture,the sole character is superior than any brand in domestic & international market.
                  超高夾持力
                  空氣源8kg/cm2之低壓源,即可達9000kgf之超高挾持力,而挾持力從0-900kgf可藉由調壓器自由調整設定。
                  Super hi-gripping force
                  Even the air source at low pressure 8kg/cm2 which can be achieved super hi-gripping force 9000kgf, and the 0~9000kgf gripping force can be adjusted freely by pressure regulator.
                  自動尋找最高氣壓源
                  當銅鋁類產品輕加工或鑄鐵類初胚重切削時,用調壓器設定在所需壓力,也不會因空氣源在低點而失壓,而且有自動補壓及穩壓之功能,以確保工件之挾持。
                  Seeking the highest air source automatically
                  When processed copper, aluminium etc.non-iron workpiece or raw cast iron etc.,making heavy cutting which can be made adaptable gripping force to ensure work piece clamping and with auto compensating & retaining pressure etc.,functions.
                  最大挾持安全距離
                  開關速度只需1.5秒,挾持安全距離可達8mm ,並設有手輪安全缐,可輕易由肉眼辨識出工件挾持之安全距離,是否超限
                  The biggest safety clamping range:
                  The shifting speed is only 1.5 sec.with safety range 8mm,also equipped with safety line on hand wheel and can be visible the clamped work piece safety range is exceeded or not.
                  立、側、臥三用
                  定寸規格,本體六面磨光並預留壓板槽,不需治具板,即可直立加工。
                  Triple usage of vertical. side. horizontal
                  Six faces of vice body be super grinding & pre-setting holding slot,and can be processed vertically without jig fixture.
                  超高材質
                  虎鉗本體材質採用高延展性之石墨鑄鐵(FCD-60)一體成型設計。兩側滑軌經硬化熱處理(HRC-45),確保高精度,高耐磨,高抗張力。
                  Super rugged material
                  The vice body is adopted hi-tensile graphite casting iron (FCD-60),one-piece design and harden heat-treatment (HRC45) at two slide which ensured hi-precision ,hi-durability & hi-tensile.way
                  內藏角固下壓結構
                  Submersed angle fixed pressed down structure

                  型號Model A B C D E F G H I J J1 J2 J3 K L M X 夾持力
                  Gripping
                  Kgf
                  凈重
                  N.W.
                  Kg
                  毛重
                  G.W.
                  Kg
                  JPV-4"-100 435 320 125 100 145 148 85 15 100 0-100 95-220 100-200 200-300 48 100 16 45 3200 27 29
                  JPV-5"-150 505 380 125 130 157 160 85 15 110 0-150 95-250 110-275 200-380 55 105 18 45 6000 38 40
                  JPV-6"-160 525 400 125 160 160 163 85 15 120 0-160 95-260 120-295 210-400 58 105 18 45 6000 48 50
                  JPV-6"-250 615 490 125 160 160 163 85 15 120 0-250 95-350 120-395 210-490 58 105 18 45 6000 52 55
                  JPV-7"-200 585 460 125 180 170 173 90 18 130 0-200 100-300 130-350 220-460 63 110 18 72 9000 65 72
                  JPV-8"-200 595 470 125 200 170 173 90 18 140 0-200 100-310 140-360 230-470 63 110 18 72 9000 70 80
                  JPV-8"-300 695 570 125 200 170 173 90 18 140 0-300 100-410 140-460 230-570 63 100 18 72 9000 79 90
                  ??

                  項次 NO. 檢查事項
                  INSPECTION ITEMS? STANDARD:100mm
                  容許可
                  GUARANTEED
                  1 虎鉗底部與滑動面平行度
                  The levelness of the vise bottom with sliding face
                  0.015mm
                  2 夾爪端面與底部之垂直度
                  The verticality of the end of jaws with bottom
                  0.02mm
                  3 側邊與滑道面之垂直度
                  The verticality of side with sliding face
                  0.02mm
                  4 鉗口面對本座底面T型槽的平行度
                  The levelness of vise opening with the T-type flute of the vise bottom
                  0.02mm
                  5 鉗口面對本座底面T型槽的垂直度
                  The verticality of vise opening with the T-type flute of the vise bottom
                  0.02mm
                  6 測試塊夾緊后其上面對本座底面之平行度
                  The levelness of the top testing block with the vise bottom
                  0.02mm
                  7 測試塊夾緊后對本座底面之上浮量
                  The excess amount of clamped test block to the vise bottom
                  +0.02mm
                  8 本座直面對底面之直角度
                  The right angle of this vertical unit to the vise bottom
                  0.02mm
                  ??


                  最新新聞

                  • DMP2019大灣區工業博覽會

                    展位號:1B37 展會時間:2019年11月26-29日 展會地址:深圳國際會展中心(新館)

                    深入了解
                  • 2019DME中國(東莞)機械展

                    展位號:3A23-2 展位時間:2019年11月14日-17日 展位地點:廣州現代國際展覽中心(東莞厚街)

                    深入了解
                  • 2019泰國曼谷機床展

                    時間:2019年11月20-23日 展館:泰國曼谷BITEC 展位:BW36

                    深入了解
                  在线天天看片视频免费观看

                      1. <th id="ymxde"><address id="ymxde"></address></th>

                          <thead id="ymxde"><option id="ymxde"></option></thead>